Styropor® product portfolio
For conventional EPS insulating applications, BASF’s range includes the Styropor® F 15 E product types. Optimized cycle times and lower block moulding times are achieved with the Styropor® F 95 E series. Peripor® rounds out BASF’s offering for the construction segment
In addition, BASF serves the packaging industry with its EPS product range: The products of the Styropor® P 26 series are characterised by their mechanical strength.
| Product | Flame retardant | Block | Molding | Loose filling | Insulation performance | Bead size rage (mm) | Usual bulk density rage (kg/m3) | Typical applications | Technical Information |
| Styropor® F 15 E Pentan content: ~6,0% | |||||||||
| Styropor® F 215 E |  |
|
|
+ |
1,0 - 2,0 | 10* - 25 | Exterior insulation (ETICS), wall and floor insulation |  |
|
| Styropor® F 215 E-L | |
|
|
+ |
1,0 - 2,0 | <10* - max. 15 | Only for low density applications (e.g. impact sound insulation, low density spacers in construction elements, loose beads) | |
|
| Styropor® F 315 E | |
|
|
+ |
0,7 - 1,0 | 16 - 30 | Roof, wall and floor insulation, insulating concrete forms (ICF) | |
|
| Styropor® F 415 E | |
|
0,4 - 0,7 | 20 - 30 | Decorating ceiling panels, technical moldings | |
|||
| Styropor® F95 E Pentan content: ~4,5% | |||||||||
| Styropor® F 295 E | |
|
O | 1,1 - 2,0 | 15 - 30 | Roof, wall and floor insulation | |
||
| Styropor® F 395 E | |
|
|
O | 0,7 - 1,1 | 18 - 35 | Roof, wall and floor insulation, technical moldings, insulating concrete forms (ICF) | |
|
| Styropor® F 495 E | |
|
O | 0,4 - 0,7 | 22 - 35 | Decorative ceiling panels, technical moldings, transport boxes, load carriers | |
||
| Peripor® E Pentan content: ~4,5% | |||||||||
| Peripor® 200 E | |
|
|
O | 1,1 - 2,0 | 22 - 35 | Perimeter insulation, flat roof insulation, sanitary components | |
|
| Peripor® 300 E | |
|
O | 0,7 - 1,1 | 25 - 35 | Perimeter insulation, flat roof insulation, sanitary components | |
||
| Styropor® P 26 Pentan content: ~6,0% | |||||||||
| Styropor® P 226 C | |
|
O | 0,9 - 1,3 | 10* - 30 | Insulation without flame-retardend requirement, packaging, blocks for contour cutting | |
||
| Styropor® P 326 | |
O | 0,7 - 0,9 | 16 - 30 | Packaging, insulated containers (e.g. fish boxes) | |
|||
| Styropor® P 326 C | |
O | 0,7 - 0,9 | 18 - 50 | For thin-walled moldings | |
|||
| Styropor® P 426 | |
O | 0,4 - 0,7 | 18 - 30 | For thin-walled moldings | |
|||
| Styropor® P 426 C | |
O | 0,4 - 0,7 | 20 - 50 | For cycletime-optimized production of thin-walled moldings | |
|||
| Styropor® P 656 | |
O | 0,2 - 0,4 | 12 - 25 | Aggregate for lightweight plaster and bitumen sealing compounds | |
|||
* by double pass expansion
TOP